HMI & Teach Pendant Zubehör Center
Startseite / alle / Allen Bradley /

PanelView 1000

PanelView 1000

  • Series overview
  • More information
  • Select by specs
  • Troubleshooting
  • Allen Bradley PanelView 1000 Replacement Repair
    Brand New In StockShips Today

    12 Months VICPAS Warranty

    Urgent Worldwide Shipping

    The PanelView Standard 1000 Graphic Terminals membrane keypad have a 10 in. grayscale or color flat-panel display with a resolution of 640 x 480. For specific PanelView terminals, PanelView is replaced with the PV abbreviation. These terminals support operator input via keypad, via touch screen or via keypad with touch screen. VICPAS supply membrane keyboard, touchscreen and LCD Display for PanelView 1000 Terminals Panel replacement.
    The most complete Allen Bradley Terminals Parts Center

  • In Stock
    • Suppy Touchscreen, Keyboard, and LCD Display for Allen Bradley PanelView 1000 Terminals Replacement

    • Touch screen Technology: analog resistive

    • Display Size: 10.1 i

    • Display Color: Amber

    • Software: PanelBuilder (Configuration and Development)

    • Input Type:Touchscreen & Keypad

    • Input Power:90-130 Volts Alternating Current


  • How to install the PanelView 1000 terminal in a panel?


    1. Cut an opening in the panel using the panel cutout provided with the terminal. Remove any sharp edges or burrs.

    2. Make sure the terminal sealing gasket is properly positioned on the terminal as shown below. This gasket forms a compression type seal. Do not use sealing compounds.

    3. Although the keypad legend insert can be installed any time, we recommend that you install it after the terminal is installed.

    4. Place the terminal in the panel cutout.

    5. Install the 6 mounting clips (2 on top, 2 on bottom, 1 on each side); the ends of the clips slide into the slots on the terminal. Tighten the clip mounting screws by hand until the gasket seal contacts the mounting surface uniformly.

    6. Alternately tighten the mounting clip screws to a torque of 1.13 N•m (10 lb•in). Do not overtighten. Bezel may not contact enclosure surface.

    7. Remove the 2 protective labels covering the top vents of the terminal.

Suche:
ModellDarstellung当前库存
Möchten Sie schnell wissen, welches Produktangebot Sie benötigen?
  • Schnelles Angebot
  • Weltweiter Versand
  • 12 Monate Garantie
  • Dienst anpassen
Abonnement
EINSTUFUNG
DEN KONTAKT HALTEN
Bitte schicken Sie uns Ihre Nachricht
*Email
Telefon
*Titel
*Inhalt
Hochladen
  • Unterstützt nur .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximal 20 MB
KONTAKTIERE UNS
QR-Code
Mobiles Web